Tovolo Stainless-Steel Perforated Colander, Large

Tovolo

List Price: $19.99
Price: $14.57
You Save: $5.42 (27%)

Product Details

  • Side handles total for easy carrying.
  • With many holes for straining, this colander drains liquids away and quickly
  • To hand in three sizes, this large colander nests the two smaller ones inside for easy storage.

Product Description


Customer Reviews

Less athletic than then I was hoping for.
It has a gratifyingly tall footing to keep it off the botom of the sink better than my old plastic one, but the bowl is so thin it is closer to being mesh than a basin. I doubt it will stand up to the years of use I'd normally expect from a kitchen implement.
Seems a scant flimsy
The colander arrived with a burly dent in it; Amazon gave me a replacement without any trouble. Overall, the colander seems flimsy, but does its job as well as any other.
In a body collander turns out to be small
I like the make-up of this collander (it has a fairly large, round base that is less likely to tip over), and it seems to be reasonably well made. However, what is sold as the "large" magnitude is actually quite small. The inside diameter of the bowl is just over 9" and, even more problematic, the spin is well less than 4" deep (i.e., quite shallow.) Thus, the capacity of the collander is actually very limited and it can be characterized as wide only relative to the other two that Amazon sells, which must be quite tiny. Be forewarned.
Metal Colander
This colander is proper right for me. The size is perfect and it washes up nicely. It's on the large size so you really do need to find cupboard gap for it.
One other con was correct...not really a LARGE
This is a fine item, but though it says LARGE, it is only 10" in diameter, not counting the handles. So, I would consider it to be more like a Conveyance size. The holes are tiny, making it fine for thin pasta.
Norpro KRONA Stainless Steel 9.5 Inch Deep Colander

Norpro

List Price: $45.00
Price: $39.95
You Save: $5.05 (11%)

Product Details

  • Leaden gauge tubular handles and tripod feet
  • Holds 5 quarts/4.8 liters and diameter of 9.5 inches/24cm
  • Lure quality stainless steel

Product Description


Customer Reviews

Prominent quality
This is a crestfallen quality piece of kitchen equipment. It's pretty large, so would be good for washing greens as well as draining pasta. It looks like it will be effortless to clean, unlike those made of wire mesh. Glad I bought it, even if it is a bit expensive. I think it will last forever.
Who knew?
This was only marginally more expensive than colanders I could find locally but the quality is much higher. I know this will hold up for a long time and I've in fact enjoyed having it in my kitchen.
Heinous quality, stainless, no plastic
Not a lot to say about a honest product. It is a great quality piece that is sturdy and stands up well to every day use. Cleans up nicely and stores nicely in a advisors.

As we are trying to get away from plastic, we were pleased that the quality of this exceeded our expectations.

Colander comparisons: Norpro 9-1/2", Norpro 8-5/8", MIU France 6 Quart
I could not commit oneself to between the Norpro Stainless Steel 9-1/2-Inch Colander, the Norpro Stainless Steel 8-5/8-Inch Colander, and the MIU France 6-Quart Brushed Stainless Steel-Colander . So I ordered all three to refer and to pick my favorite.

PROS

* Storage takes virtually no more room than a 4-quart -- little size
* Easily fits into my standard stainless steel sink
* Beautiful construction
* Holds 6 quarts

CONS

* Degree smaller handles are not quite as large and easy to grasp as the MIU France (but they are still very good handles)
* Repeat finish not as highly polished as the MIU France
(Also it will not fit inside my pasta stockpot due to handles, but none of the three did.)

My favorite is the MIU France. I'll get to why in a twinkling. First, let's explore the differences and similarities between these three colanders. All are very fine colanders, and you will be happy with any of them, in my opinion.

The differences in them are as follows:

The Norpro Stainless Steel 9-1/2-Inch Colander:

MEASUREMENTS

I'm providing measurements here, as many shoppers privation to feel like they can reach out and touch the colander. For those not into measurements, skip this section.

The Norpro Stainless Steel 9-1/2-Inch Colander is a maximum-quality colander that, like its smaller cousin, the Norpro 8 5/8-Inch Colander, easily fits into my stainless steel twice sink. The colander is approximately 1/8" to slightly less than 1/4" higher than the side of my sink, so it is roughly even with the side of my sink. My undertaking was built in the 1980s and the sink is typical for kitchens of that decade. The sink has a depth of 5 1/2 inches and secret sink width of 14 inches wide by 15 3/4 inches deep.

See attached photos which show this colander, the other Norpro, and the MIU France in my descend.

Colander dimensions are: 9 1/2" inside bowl diameter, just the bowl, not including the handles; 10" exterior bowl diameter, just the bowl, not including the handles; approximately 12 5/8" with handles included. The handles are 1 1/4" weighty at their deepest point and approximately 3 1/4" at their widest point inside the handle, not including the deal hardware. The handles are 1 5/8" deep by slightly more than 3 3/4" at their widest point outside the finger, including the handle hardware.

Colander height is 6 1/16" including the feet. Without the feet, just the colander from the center of the favourable to the top is approximately 5 1/2". I had to eyeball this measurement, so I did the best I could. The feet are approximately 1 inch long, but because they jut out of the colander at an standpoint, they only raise the colander up about 1/2" from the surface on which the colander is placed. However, there was a defect in the Norpro Stainless Steel 9-1/2-Inch Colander I received, and it tilted at a one-sided angle as one of the three feet was improperly attached at the wrong angle.

Drainage holes on the side of the colander are bigger than those on the bottom of the colander. Drainage holes on the side are reasonable shy of 3/16" in diameter while those on the bottom are just over 1/8" in diameter. There are 300 holes along the side and 126 holes on the bottom, numbers for drainage. The bottom is 4 3/4" in diameter, a full half-inch narrower along the bottom than the MIU France 6-quart colander.

DURABILITY

The pat is welded on. Each side of the handle appears to be welded at only two points. These points are barely visible, via a slight hollow, on the inside of the colander.

I wonder if the welded points are strong enough to hold the handles in place over many years. I presume the welding is quite strong, because I gave the smaller version of this colander to my brother several years ago, and he loves it. He has had no problems with it and uses it often.

Entire APPEARANCE

The exterior is brushed metal stainless steel, with a band of polished stainless steel approximately one inch wide at the top of the colander. The handles and feet are expert stainless.

MIRROR FINISH

The interior of this colander has a mirror finish, but it's not on the same par as the MIU France. I can see my reflection in the bottom of the MIU France colander. I am unable to do that in either of the two Norpro colanders.

MAKING PASTA

In lieu of a pasta introduce, I like to place my colander with drained pasta inside my stockpot to keep it warm.

My old colander did not have handles and fit easily interior my pasta pot. Due to the handles, this one will not fit inside my stockpot. However, none of the three did.

CAPACITY

This colander holds six quarts. The Norpro 8-5/8-Inch holds 4 quarts and the MIU France holds 6 quarts.

As a relation, let us look at the two other colanders.

NORPRO 8-5/8-INCH COLANDER

The Norpro Stainless Steel 8-5/8-Inch Colander:

I gave this requisition colander as a gift to my brother several years ago. He loves it. He uses it a lot for items like boiled peanuts, pasta, and baneful-eyed peas.

If you do not want a 6-quart colander, the Norpro Stainless Steel 8-5/8-Inch Colander would be a fine choice for a colander. There is measure less room in the handle area for this handle than the MIU France colander. I have somewhat long fingers and prefer the progress and size of the MIU France colander's handles. Still, my hands do fit inside these handles. Someone with bigger hands will want to about the MIU France colander's handles.

If you are looking for a four-quart model, you can read my review about it here: Norpro Stainless Steel 8-5/8-Inch Colander

Here is the certain colander as a comparison.

MIU France MIU-6-Quart-Brushed-Stainless-Steel-Colander:

This is my favorite of the three. The handles are a lovely rounded shape and larger than the Norpro handles, making it easier for my broad hands to grasp them. I can hold the handles and not touch the colander, potentially hot from scalding pasta water for case, so these larger handles could prevent kitchen accidents. The MIU France's mirror finish interior is more strongly polished than that of the Norpro colanders. As the old commercial goes, I can literally see my reflection in the MIU France, but not in the Norpro.

For colander dimensions and a match, you can read my review here: MIU-6-Quart-Brushed-Stainless-Steel-Colander

SUMMARY

In summary, all three colanders fit easily into my sink. All three take about the same Nautical galley cabinet space to store, with no appreciable difference, though the six-quart colanders are slightly higher than the four-quart prototype.

All have similarities in construction: inner polished mirrored finishes, mirrored finish on the feet and handles, and an outward brushed stainless steel finish with a one-inch wide band of polished stainless steel at the top.

The handles are different; looking at the photos I have included of these colanders shows you that the MIU France's handles are wider and roomier, yet the Norpro handles are operational as well.

All three colanders have 300 holes around their sides. The bottom hole content varies, but not enough to make a difference in their handling of any drainage of nutriment or liquids. The bottom width varies between the three, with the narrowest bottom on the Norpro 8-5/8-inch colander and the widest bottom on the MIU France 6-quart colander.

All are made in China, including the MIU France. This in no way detracts from their pulchritude or functionality. All three are excellent choices in colanders.

PHOTOS

See customer images for photos of all three colanders for weighing.

RECOMMENDATION

My personal preference is the MIU France MIU-6-Quart-Brushed-Stainless-Steel-Colander. I prefer the larger round handles, both utilitarian and beautiful. The mirror finish is more highly polished. Also, since all three take approximately the same storage space, I would go ahead and come into being for a 6-quart. That way you will be able to drain larger amounts of food should the need arise.

I highly push all three of these colanders, with an edge to my top pick, the MIU France 6-Quart Brushed Stainless-Steel Colander. However, if you choose this Norpro Stainless Steel 9-1/2-Inch Colander, you have purchased a lofty quality colander that will last you for years.
the protruding feets make restitution for it annoying to clean.
The protruding tripod feets dream it annoying to clean - especially the starch residue of pasta. I would recommend the Tovolo with the continuous single shot base for this reason - much easier to clean.

3 Piece Deluxe Stainless Steel Colander Set - As Seen on TV

Each of the colanders features easygoing-to-grip handles and a stable base to hold it steady. These three nesting colanders are made from stainless steel for quick draining of everything from pasta to fruits and vegetables. Features take in: High quality non-magnetic stainless steel Steep sides to hold large quantities Hollow handles for a agreeable grip Footed base for a stable hold on surfaces Dishwasher safe and easy to even 20, 24, and 28 cm diameters

Array

Prices topic to change. Please visit www.hsn.com or call 1-800-284-3100 for the current selling price. Start your cookware collection straight with ...

How did they know? CIA releases new soup recipe book -“The New Book of Soups ... 89.3 KPCC (blog)

1 1/2 Tsp stockpile, or as needed

1. Place the chicken and water in a large pot. The water should cover the chicken by at least two inches; add more if inexorable. Bring the water slowly to a boil over medium heat.

2. As the water comes to a boil, skim away any froth that rises to the surface . Adjust the heat once a boil is reached so that a slow, lazy simmer is established. Top partially and simmer for 2 hours, skimming as often as necessary.

3. Add all of the remaining ingredients. Continue to simmer, skimming the fa as necessary, until the broth is fully flavored, about 1 hour.

4. Remove the chicken pieces from the pot and cool slenderize. Dice or shred the meat and use to garnish the broth or save for another use; discard the skin and bones.

5. Wrench the broth through a colander or sieve into a large metal container. Discard the solids.

6. If you are using the broth put away, skim off any fat on the surface. If you are not using the broth right away, cool it quickly by transferring it to a metal container (if it’s not in one already) and placing the container in a go downhill filled with ice cold water. Stir the broth as it cools, and then transfer it to storage containers. Outlet in the refrigerator for up to 5 days, or in the freezer for up to 3 months. Label and date the containers clearly before putting them into the freezer.

would a steel colander work as faraday cage?

working on my computer, desideratum to take out the components and was wondering if my stainless steel colander would work as anti-static storage container?


It is plausible... but it will depend on how your colander is. Actually, the internal metal lining of most consumer electronics, as well as the metal action of most personal computers, often work as faraday cages, but that's not a 100%.

As I said it will depend on how exactly it is.


A faraday shut up is a volume that is surrounded by conductive material in order to shield that volume from radio waves.

That's not what you dire to avoid static damage to computer components. What you need is adequate grounding, so that no static electric future builds up between you and the computer or any removed parts of the computer. In dry weather, static can be generated simply by a little rubbing together of parts of your clothing.

If you miss to be extra-careful, you should (1) make sure that the computer is unplugged (2) connect yourself to metal on the computer chassis---use a wrist strap [from computer stock] or simply tape the uninsulated ends of a piece of wire to your body and to the metal on the computer (3) spot removed parts on a conductive surface (cookie sheet, for example) that is also connected by wire to the computer chassis. Being connected to the computer by metal assures that there is no impressive voltage between you and the computer.

If you're willing to be less careful, you can simply touch (or hold on to) metal on the computer chassis before you be on a par with anything inside the computer, or before you touch any removed component. Avoid touching the pins inside connectors and the metal parts of circumference boards, etc.


my colander went kinda weird looking in the dishwasher!!!?

I have this 20 year old colander (it was a coalescing present for my mam and dad, the friggin thing lasted longer then the marriage!!)lol
anyway, I got a dishwasher about 2 months ago and since then my colander has these dark ashen/brown streaky things on it, the colander is originally stainless steel and where it has the permanent streaks it feels rougher!


what is it and is there a way to reverse it?

(it doesn’t mater if there isn’t, I was above all just wondering what caused it, the thing is in bits anyway!!) lol
****************EM**************

come to think of it, it probably is aluminium!! thanks!!


I'm guessing that its not stainless steel , but aluminium. They look equivalent , ali is lighter. Aluminium hates going it the dishwasher as it reacts with the caustic cleaning agent - this makes it go cheerless or black and powdery. It etches it.
If it is steel, then it may not have been 'mixed' well and the mild steel areas are rusting (stainless contains temperate steel) , or it may have mild steel rivets that have rusted.


stainless steel colander News




Craftsman-Inspired Style Puts Cook Center Stage Kitchen and Bath Design News
Craftsman-Inspired Style Puts Cook Center Stage Kitchen and Bath Design News Caboose and Bath Design NewsCraftsman-Inspired Style Puts Cook Center StageKitchen and Bath Contrive News, NYThe sink nearest the range and refrigerator features an integral stainless colander above a disposal system, creating a well-defined prep square from the opposite clean-up area. The seating challenges the space presented were two-fold: while White

Cloud Computing's EPIC Problem Microsoft Watch
Cloud Computing's EPIC ProblemMicrosoft WatchThe classification sees all cloud computing services as colanders, not stainless steel bowls. epic's complaint is shockingly nagging. The organization wants to take away your Gmail. Among the demains for relief: "Enjoin Google from oblation Cloud

Colander Directory

Stainless Steel Colander
The pre-eminent deals and lowest prices on the useful stainless steel colander to make your cooking experience a breeze.